Keep comfort stable by combining temperature targets with circulation timing.
Notifications for temperature drift, sensor issues, and service intervals.
glowbrook is based in Aarhus and focuses on the production and sales of premium smart water heating and circulation systems for private pools, spas, hot tubs, and decorative ponds. We combine compact hardware layouts with practical controls: temperature sensors where they matter, circulation logic that supports filtration, and automation that stays readable for homeowners and installers.
Denmark’s climate and energy expectations demand systems that are efficient in operation and sensible in installation. Our approach starts with real usage patterns: desired water temperature, cover habits, seasonal periods, wind exposure, and available energy sources. From there we specify heat pump capacity, circulation pump performance, pipe sizing, and control strategies that aim for stable comfort with responsible energy consumption.
glowbrook systems are designed for real operating efficiency, not just peak output. Control strategies reduce unnecessary cycling, coordinate circulation with heat transfer, and support off-peak heating when your setup allows. For many owners, the benefit is smoother temperatures, fewer manual adjustments, and clearer insight into when and why the system is running.
Remote monitoring helps you stay informed without turning your pool room into a control desk. View temperatures, circulation status, and setpoints, and receive alerts when readings look unusual. glowbrook keeps the focus on actionable information, with settings structured for homeowners while still supporting professional servicing.
Where a site supports it, glowbrook can integrate solar-assisted heating into the overall control scheme. The goal is sensible prioritisation: use available solar gain when it contributes meaningfully, then fall back to heat pump operation for consistent comfort. Integration planning includes sensors, valves, and safe temperature limits.
Premium systems should be easy to maintain. glowbrook focuses on access, clear labeling, and parts choices that are appropriate for Danish conditions. Maintenance planning is part of the specification, including winter modes for ponds and practical checks for private pool rooms where space can be limited.
Below are examples of typical configurations. Final sizing depends on your water volume, insulation and cover use, target temperature, season length, and site conditions. glowbrook provides recommendations with transparent assumptions, so you can compare options confidently.
Variable-speed heat pump designed for steady output and lower sound levels. Best suited for private pools where consistent comfort matters more than short bursts of high power.
Efficient circulation package with configurable flow profiles. Supports filtration, heating transfer, and gentle surface movement for private pools and spa systems.
Hybrid-ready control and hydraulic layout that can prioritise solar gain when available and switch smoothly to heat pump support when conditions change.
Control hub for temperature management and compatible water-quality signals. Designed to keep system behavior understandable, with clear status indicators and safe fallback modes.
Compact package tailored for hot tubs and private spas where quick recovery and stable soaking temperatures matter. Designed for efficient standby operation.
Circulation and control approach for ornamental ponds that prioritises stable flow, equipment protection, and seasonal adaptation. Suitable for fish-friendly setups when specified correctly.
A heat pump that is too small struggles in shoulder seasons; too large may cycle inefficiently and add avoidable cost. glowbrook sizing starts from your water volume, insulation and cover practices, desired temperature, and seasonal usage. You receive a configuration recommendation with clear assumptions and optional upgrades such as hybrid solar integration and remote monitoring.
A premium system is more than equipment. glowbrook supports planning, installation coordination, and seasonal optimisation so your system behaves predictably through Danish weather changes. Whether you are building a new pool room, upgrading an existing heat pump, or stabilising pond circulation, we focus on scope clarity and long-term maintainability.
Our service offerings are designed to meet homeowners where they are: from a simple quote request to a full specification including hydraulics, controls, and remote monitoring. When installations involve multiple trades, we help define responsibilities and handover steps so the finished system is easy to operate and service.
We specify heating capacity, circulation performance, and control logic based on your goals and site constraints. The output is a practical configuration plan that you can use for installation and future servicing. glowbrook design work includes sensible safety limits and documentation of the assumptions behind sizing.
glowbrook can coordinate installation with qualified partners and ensure the commissioning process is complete: sensor validation, flow checks, and control calibration. We focus on a clean handover, with operating guidance and a clear path for routine maintenance and seasonal switching.
Set up the glowbrook app connection, permissions, and alert thresholds so you receive meaningful notifications. Remote monitoring is optional and can be disabled; when used, it helps shorten troubleshooting time and supports seasonal adjustments without repeated on-site visits.
Danish spring and autumn often require different heating and circulation strategies than summer. glowbrook can tune setpoints and schedules, confirm sensor placement, and adjust operating modes to reduce cycling while keeping comfort consistent for the way you actually use your pool or spa.
For owners who want predictable upkeep, glowbrook offers maintenance planning focused on longevity and stable performance: filter and circulation checks, sensor verification, system cleaning intervals, and winterisation guidance for pond setups. For upgrades, we assess what can be kept, what should be replaced, and how to align controls so heating and circulation work together rather than competing.
Every site is different. glowbrook case studies focus on the decision process: constraints, goals, chosen configuration, and commissioning steps. We avoid unrealistic promises and instead share what we measured and why we selected specific approaches, so you can spot what applies to your installation.
The owner wanted steadier temperatures and less noise than their older fixed-speed setup. glowbrook proposed an inverter heat pump with circulation coordination and revised setpoints to reduce cycling. Commissioning included sensor validation and an operating guide for summer versus shoulder seasons.
A compact spa system struggled with temperature drift after heavy evening use. glowbrook adjusted circulation schedules and recovery logic, then validated the sensor placement. The result was predictable warm-up behavior without constant manual tweaks, along with clear alert thresholds for future troubleshooting.
The project goal was consistent circulation and easier winter operation. glowbrook recommended a season-aware profile with reduced flow modes and service reminders. The owner received a simple checklist for autumn and spring transitions, designed around Danish weather and maintenance habits.
The quotes below are placeholders intended to show layout and tone for a future testimonials section. glowbrook does not publish fabricated names, photos, or unverifiable claims. When we add testimonials, they will be attributed with permission and reflect real customer experiences.
“We wanted stable temperatures and a setup that is simple to operate day to day. The control screen and schedules made sense, and the system feels calmer and more predictable.”
“The remote monitoring is useful because it tells us what is happening without overcomplicating things. The alerts feel practical instead of noisy.”
“We appreciated the clear quote and the explanation of trade-offs. It was easy to compare options and choose what mattered for our season length and desired temperature.”
When customers share feedback, we use it to refine documentation, improve commissioning checklists, and adjust default control profiles. We do not treat feedback as marketing material by default. If we request permission to publish a quote, we will clarify what will be shown and how it will be attributed.
Tell us about your pool, spa, or pond and what “comfortable” means for you. The more detail you share, the more precise our recommendation will be. glowbrook uses your message to respond to your request, prepare a quote when relevant, and coordinate any next steps you choose.
For planning, quotes, and service questions, contact us using the form or details below. We aim to respond within normal business hours. If your request is time-sensitive, please call.
We use your details to respond to your request and maintain a record of our correspondence. Learn more in our Privacy Policy.
We review your size and temperature goals, ask any missing questions, then propose a configuration with optional add-ons such as hybrid solar or monitoring.
If available, share your water volume, cover type, location of equipment, and any existing pump/filter specifications. Photos are helpful, but not required. glowbrook does not need sensitive personal data to prepare a quote. If you prefer not to share a phone number, email is sufficient.
When using our platform, it is important to carefully read and fully understand the terms of service provision. Regardless of whether you use tools for cryptocurrency trading or solutions based on artificial intelligence, knowledge of local legal norms and tax obligations is of essential importance. For example, crypto-assets are generally accounted for in Box 3 (tax on savings and investments / vermogensrendementsheffing), where taxation is applied based on the presumed return on assets (in 2026 — approximately 36% of the calculated fictitious return for investments and other assets, including cryptocurrency).
Attention: from 2028 (after approval of the corresponding changes) a transition to taxation of actual return is planned, including unrealized capital growth (capital growth tax) at a rate of 36%, even if the assets have not been sold.
In the Netherlands, financial services and activities related to crypto-assets are regulated by the Autoriteit Financiële Markten (AFM) and De Nederlandsche Bank (DNB). Since December 2024, crypto-asset service providers (CASPs) are subject to licensing in accordance with the European regulation MiCAR (Markets in Crypto-Assets Regulation). These rules are aimed at protecting investors, ensuring transparency, preventing money laundering and the proper functioning of the crypto-asset market.
In the European Union (including the Netherlands) there are strict requirements for the distribution and marketing of high-risk financial products, as well as crypto-assets. These norms (including MiCAR and applicable EU rules) are aimed at ensuring transparency of information for users and giving them the opportunity to make informed investment decisions.
By agreeing to our privacy policy and terms of use, you confirm that certain personal and financial data may be transferred to trusted third-party trading service providers to the extent necessary for the provision of the service and in compliance with legal requirements (including MiCAR and data protection rules).
Our platform offers flexible trading strategies: you can choose between AI-based automated trading, support from human brokers or manual decision-making — all of this is adapted to your individual needs and preferences.
It is recommended to independently familiarize yourself with the current rules of the AFM, DNB, MiCAR and the tax legislation of the Netherlands (in particular Box 3) before starting any trading activity.